< Back ×
My Vehicle Change Vehicle
1986 Chrysler New Yorker
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 1986 Chrysler New Yorker
PartNumber: 20-7903Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;with Firm Feel Steering (SBB);without Aftermarket Filtration Improvement;Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 1986 Chrysler New Yorker Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | All Engines
$44.79
National® Power Steering Pump Shaft Bearing for 1986 Chrysler New Yorker
PartNumber: 203-FFProduct Specifications- Notes: Two Seal Design; Chrysler Type; with 60, 65, 78 Amp Alternator
- Bore: 0.669"
- Inner Race Bore: 0.669"
- Inner Race Outside Diameter: 5.512"
- Inner Race Radius: 0.024"
- Inner Race Width: 0.472"
- Outer Race Outside Diameter: 1.575"
- Outer Race Radius: 0.024"
- Outer Race Width: 0.472"
- Outside Diameter: 1.575"
- Width Belt: 0.472"
- Part Description: 1986 Chrysler New Yorker Power Steering Pump Shaft Bearing
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | All Engines
$7.88
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 1986 Chrysler New Yorker
PartNumber: 20-7833Product Specifications- Notes: with Standard Steering (SBA);without Aftermarket Filtration Improvement;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle; Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 1986 Chrysler New Yorker Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | All Engines
$44.71
Cardone Reman® Power Steering Filter for 1986 Chrysler New Yorker
PartNumber: 20-0012FProduct Specifications- Notes: Our Magnetic In-Line Filter measures 2 1/4" X 5" w/12 mm Outer Dia Neck (Designed For Use w/1/2" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 1/2"
- Housing Material: Aluminum
- Inlet Diameter: 0.527"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.527"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617974172
- Part Description: 1986 Chrysler New Yorker Power Steering Filter
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | All Engines
$20.05Cardone Reman® Power Steering Filter for 1986 Chrysler New Yorker
PartNumber: 20-0038FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.;with Aluminum Housing
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.395"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.397"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617953122
- Part Description: 1986 Chrysler New Yorker Power Steering Filter
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | All Engines
$20.45Cardone Reman® Power Steering Filter for 1986 Chrysler New Yorker
PartNumber: 20-0058FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/5/8" Outer Dia Neck (For 5/8" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 5/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.651"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.654"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 884548041394
- Part Description: 1986 Chrysler New Yorker Power Steering Filter
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | All Engines
$20.05Cardone Reman® Power Steering Filter for 1986 Chrysler New Yorker
PartNumber: 20-P038FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.;with Plastic Housing
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Plastic
- Inlet Diameter: 0.406"
- Installation Hardware Included: Hose Clamps (2), O-Ring
- Outlet Diameter: 0.415"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps, O-Ring
- Product Condition: New
- UPC: 884548053915
- Part Description: 1986 Chrysler New Yorker Power Steering Filter
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | All Engines
$15.50
SKF® Power Steering Pump Shaft Seal for 1986 Chrysler New Yorker
PartNumber: 7475Product Specifications- Attribute: CRWA1
- Bore: 1.312"
- Metal: cased with sealant coating on the outside diameter
- Nitrile rubber: NBR
- Outlet Diameter: 1.316"
- Shaft: 0.75"
- UPC: 085311005708
- Width: 0.25"
- Part Description: 1986 Chrysler New Yorker Power Steering Pump Shaft Seal
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | All Engines
$10.86
Gates® Power Steering Pump Seal Kit for 1986 Chrysler New Yorker
PartNumber: 351160Product Specifications- UPC: 072053419894
- Part Description: 1986 Chrysler New Yorker Power Steering Pump Seal Kit
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | 4 Cyl 2.2L
- 1986 Chrysler New Yorker | All Trims | 4 Cyl 2.5L
Gates® Power Steering Pump Shaft Seal for 1986 Chrysler New Yorker
PartNumber: 348720Product Specifications- UPC: 072053417906
- Part Description: 1986 Chrysler New Yorker Power Steering Pump Shaft Seal
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | 4 Cyl 2.2L
- 1986 Chrysler New Yorker | All Trims | 4 Cyl 2.5L
OEM (Genuine) 1986 Chrysler New Yorker Boot Kit Hydraulic Steering Gear Rac
PartNumber: 4147303
Product Specifications- Notes: All Models; Trw Gear; Trw, From 9/30/83
- Location: Driver Side; Passenger Side
- Other Names: Boot, Boot Kit, Tie Rod Boot
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1986 Chrysler New Yorker Boot Kit Hydraulic Steering Gear Rac
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Fifth Avenue, Landau, Salon, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Pump
PartNumber: 4470314Product Specifications- Notes: All Models; Standard; W/O Firm Suspension
- Other Names: Pump
- Item Weight: 9.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1986 Chrysler New Yorker Power Steering Pump
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Fifth Avenue, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Reservoir Power Steering Pump
PartNumber: 3643453Product Specifications- Other Names: Power Steering Pump, Reservoir, Reservoir Tank
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1986 Chrysler New Yorker Reservoir Power Steering Pump
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Fifth Avenue, Landau, Salon, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Reservoir Power Steering Pump
PartNumber: 3643453Product Specifications- Other Names: Power Steering Pump, Reservoir, Reservoir Tank
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1986 Chrysler New Yorker Reservoir Power Steering Pump
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Fifth Avenue, Landau, Salon, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
MAVAL® Power Steering Pump for 1986 Chrysler New Yorker
PartNumber: 9726MProduct Specifications- Notes: Pulley needs to be transferred w/proper pulley removal/install toll.
- UPC: 843613104730
- Part Description: 1986 Chrysler New Yorker Power Steering Pump
Vehicle Fitment- 1986 Chrysler New Yorker | All Trims | All Engines
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Control Valve
PartNumber: 3815875Product Specifications- Notes: All Models; Trw Gear; Trw
- Part Description: 1986 Chrysler New Yorker Power Steering Control Valve
Vehicle Fitment- 1986 Chrysler New Yorker | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Rebuild Kit
PartNumber: 3815878Product Specifications- Notes: Rack Seal Kit; Trw Gear
- Part Description: 1986 Chrysler New Yorker Power Steering Rebuild Kit
Vehicle Fitment- 1986 Chrysler New Yorker | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Cylinder Boot Kit
PartNumber: 4131348Product Specifications- Notes: All Models; Right
- Part Description: 1986 Chrysler New Yorker Power Steering Cylinder Boot Kit
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Cylinder Boot Kit
PartNumber: 4131349Product Specifications- Notes: All Models; Left
- Part Description: 1986 Chrysler New Yorker Power Steering Cylinder Boot Kit
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Cylinder Boot Kit
PartNumber: 4147092Product Specifications- Notes: All Models; Saginaw Gear; Right; Saginaw
- Location: Passenger Side
- Part Description: 1986 Chrysler New Yorker Power Steering Cylinder Boot Kit
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Cylinder Boot Kit
PartNumber: 4147093Product Specifications- Notes: All Models; Saginaw Gear; Left; Saginaw
- Location: Driver Side
- Part Description: 1986 Chrysler New Yorker Power Steering Cylinder Boot Kit
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Rebuild Kit
PartNumber: 4147098Product Specifications- Notes: Rack & Pinion Seal Kit; Saginaw Gear
- Part Description: 1986 Chrysler New Yorker Power Steering Rebuild Kit
Vehicle Fitment- 1986 Chrysler New Yorker | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Rebuild Kit
PartNumber: 4147099Product Specifications- Notes: Bulkhead Seal Kit; Saginaw Gear
- Part Description: 1986 Chrysler New Yorker Power Steering Rebuild Kit
Vehicle Fitment- 1986 Chrysler New Yorker | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Rebuild Kit
PartNumber: 5205293Product Specifications- Notes: Rack Seal Kit; Saginaw Gear
- Part Description: 1986 Chrysler New Yorker Power Steering Rebuild Kit
Vehicle Fitment- 1986 Chrysler New Yorker | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Rebuild Kit
PartNumber: 5205296Product Specifications- Notes: Stub Shaft Seal Kit; Saginaw Gear
- Part Description: 1986 Chrysler New Yorker Power Steering Rebuild Kit
Vehicle Fitment- 1986 Chrysler New Yorker | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Pump
PartNumber: 5214734Product Specifications- Notes: 2.2 & 2.5 Liter
- Part Description: 1986 Chrysler New Yorker Power Steering Pump
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Pump Pulley
PartNumber: 5214734Product Specifications- Notes: 2.2 & 2.5 Liter
- Part Description: 1986 Chrysler New Yorker Power Steering Pump Pulley
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1986 Chrysler New Yorker Power Steering Pump
PartNumber: 5274221Product Specifications- Notes: All Models; Extra Hd Susp;All Models; Firm Feel; W/Firm Suspension
- Part Description: 1986 Chrysler New Yorker Power Steering Pump
Vehicle Fitment- 1986 Chrysler New Yorker | Base, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS