12 products about 1984 Volkswagen Rabbit Convertible Wheel Hubs, Bearings, Seals & Components found
Product Specifications- Inner Diameter: 3.250"
- Outer Diameter: 3.250"
- UPC: 085311232685
- Width: 2.50"
- Part Description: 1984 Volkswagen Rabbit Convertible Front Wheel Bearing Kit
More Info Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Notes: Wheel Bearing; Axle Nut Torque Spec: 174 ft-lbs / 236Nm
- Gasket or Seal Included: No
- Greaseable: No
- Hub Pilot Diameter (Inch): 2.518
- Material: Steel
- Product Condition: New
- UPC: 029175921057
- Part Description: 1984 Volkswagen Rabbit Convertible WHEEL BEARING
More Info Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | 4 Cyl 1.8L
Product Specifications- Notes: w/VW 010 Trans;w/VW 020 Trans
- Part Description: 1984 Volkswagen Rabbit Convertible Rear Passenger Side Outer Wheel Bearing
Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Outer Diameter: 2.5197"
- UPC: 085311068802
- Part Description: 1984 Volkswagen Rabbit Convertible Front Passenger Side Wheel Bearing
More Info Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Inner Diameter: 2.3770"
- Outer Diameter: 2.6770"
- UPC: 085311530538
- Width: 0.0787"
- Part Description: 1984 Volkswagen Rabbit Convertible Front Wheel Bearing Lock Ring
More Info Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone
- Part Description: 1984 Volkswagen Rabbit Convertible Front Driver Side Inner Tapered Wheel Bearing and Race Set
Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Notes: w/VW 010 Trans;w/VW 020 Trans
- Cup Bore (Inch): 2.5625
- Cup Bore (mm): 65.0880
- Cup Length (Inch): 0.5500
- Cup Length (mm): 13.9700
- Cup Radius (Inch): 0.0460
- Cup Radius (mm): 1.1680
- Part Description: 1984 Volkswagen Rabbit Convertible Rear Inner Tapered Wheel Bearing Race
More Info Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone
- Part Description: 1984 Volkswagen Rabbit Convertible Rear Passenger Side Inner Wheel Bearing and Race Set
Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone
- Part Description: 1984 Volkswagen Rabbit Convertible Front Driver Side Outer Wheel Bearing and Race Set
Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Bore: 34.000 mm
- Design: Double Row Angular Contact
- Inner Race Bore: 34.000 mm
- Inner Race Radius: 2.540 mm
- Inner Race Width: 1.457"
- Outer Diameter: 2.520"
- Outer Race Outside Diameter: 64.000 mm
- Outer Race Width: 1.457"
- Series: FWDB
- Type: E-3"
- Width: 1.457"
- Part Description: 1984 Volkswagen Rabbit Convertible Front Driver Side Wheel Bearing
More Info Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Notes: FAG Global# 103121; Tapered Roller Bearing Set
- Bearing Inside Diameter: 1.25; 31.75
- Bearing Outside Diameter: 2.328; 59.131
- Length: 0.625; 15.875
- UPC: 670774138270
- Part Description: 1984 Volkswagen Rabbit Convertible Front Driver Side Inner Wheel Bearing
More Info Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines
Product Specifications- Notes: FAG Global# 401090
- Bearing Inside Diameter: 1.25; 31.75
- Length: 0.66; 16.76
- UPC: 670774290626
- Part Description: 1984 Volkswagen Rabbit Convertible Front Inner Wheel Bearing
More Info Vehicle Fitment- 1984 Volkswagen Rabbit Convertible | All Trims | All Engines