The Chevrolet Cavalier is a compact car. It was produced by General Motors under the Chevrolet brand. And it was started in 1981 in North America. The Chevrolet Cavalier enjoys a high reputation among the mass for its great parts. During the development of the car, many popular parts have been built. The Chevrolet Cavalier distributor involves a rotating arm in the inner part of the distributor cap and above the distributor shaft. Usually, the metal part of the rotor comes into contact with high-voltage cables through a carbon brush. With the high voltage generated from the ignition coil, an electric current can jump the small gaps between the rotors.
Chevrolet Cavalier offers great parts to you. The distributor is one of them. But there will be several problems after it has been used for years. The main components of a Chevrolet Cavalier distributor include the following: rotors, distributor caps, points, hall effect sensors, and so on. Its removal process is as follows. Remove the retaining clips holding the distributor cap in place. Then remove the cap and mark the position of the rotor. Next, remove all ignition wires and label them if necessary. The vacuum lines and the bolt lock the Chevrolet Cavalier distributor in place. Finally, pull the distributor straight out and remove the O-ring. There are many Chevrolet Cavalier products and devices online 24 hours a day and 7 days a week. The car will remain classic with its great parts.