BMW 325e Rack and Pinion Boot

The first BMW 325e parts were available for drivers in early 1984. Drivers and reviewers praised the handling of the BMW 325e parts. During the development of the 325e, many popular parts like the rack and pinion boot parts have been built. The steering rack boot is made to be accordion-like to allow lateral and vertical movement depending on how the suspension reacts. A faulty 325e rack and pinion boot can cause rough steering, or the steering rack can fail and lead to a bad driving experience.

Although 325e has lots of auto parts with impressive performance, its rack and pinion boot parts still need repair and maintenance after a long time of usage. The 325e rack and pinion boot part is used to prevent any contaminants from entering the rack and pinion system. The removal process for a 325e rack and pinion boot is as follows. First, raise and support the vehicle. Then remove the front steering components (inner and outer tie rod ends). And finally cut the clamps holding the boots in place. We provide considerate and nice services to consumers. Get great rack and pinion boot parts online with just a few clicks.