The BMW 323i has extra equipment and better handling. It has considerably more power and torque and better acceleration. Classic parts like the valve stem oil seal parts contribute to the success of the BMW 323i. The valve stem oil seal regulates the amount of oil that is used to lubricate the engine by letting a certain amount of oil inside the stem.
During the development of 323i, many popular parts have been built. But maintenance and upgrades for valve stem oil seal parts are required after a long time of usage. The valve stem oil seal parts are responsible for controlling the amount of oil that is allowed to get into the valve guide for lubrication. The removal process for 323i valve stem oil seal parts is as follows. Drain the coolant, remove the cylinder heads off the engine block, attach a compressor check tool and used compressed air to hold the valve in place. Then, the compressed air will allow for the removal of the spring and not let the valve drop. Next, place the cylinder on top dead center, use a spring compressor tool to compress the valve springs, and remove the valve spring. Finally, pull the 323i valve stem oil seal out of place with some pliers. We are here for you 24/7. There are plenty of inexpensive and quality 323i parts online.