Audi TT Brake Pad Set

The Audi TT is a 2-door production sports car. The model was listed in Car and Driver magazine's Ten Best list for 2000 and 2001. TT has built many popular parts, such as the brake pad set. The ceramic pads work better for exotic cars and under high temperatures. The materials of the brake pad set parts are important as they provide a lot of resistance toward brake fade, and moisture.

But the worn TT brake pad set parts need to be repaired or replaced for better TT performance. You need to inspect the brake pad set before replacing the brake pads. You should look for the profile of the parts to ensure they are wearing evenly, and inspect cracking or scoring on the rotor surface. The steps to remove the TT brake pad set parts are as follows. Raise the vehicle and remove the lug nuts off the wheel first. Next, remove the caliper bolts and place the caliper to the side without damaging the brake line. Then remove the shims and pads. Fourth, press the caliper piston back into the housing. Fifth, add new anti-squeal shims and place the pads into place before installing new pads. The next step is to reinstall the caliper and torque the caliper bolts to spec. Finally re-bleed all brakes on the vehicle. The vehicle will remain classic for its useful TT parts, like the brake pad set. Get helpful TT brake pad set parts at a low price with just a few clicks online.