Audi S3 Brake Pad Set

The Audi S3 was introduced in 1999. During its development, many popular S3 brake pad set parts have been built. The ceramic pads work better for exotic cars and under high temperatures, and the normal brake pad set parts perform better for most vehicles. The brake pad set's job is to transfer the kinetic energy of the vehicle to the thermal energy which is caused by friction.

S3 provides a large selection of high-performance parts. But after a long time, the worn brake pad set parts might cause huge problems. The S3 brake pad set parts have wear indicators that come into contact with the rotor once the pads have been used up to their minimum surface area. The steps to removing and replacing the S3 brake pad set include: Raise the vehicle and remove the lug nuts off the wheel, next remove the caliper bolts and place the caliper to the side without damaging the brake line, then remove the shims and pads, next press the caliper piston back into the housing, add new anti-squeal shims and place the brake pad set into place before installing new pads, then reinstall the caliper and torque the caliper bolts to spec, and finally re-bleed all brakes on the vehicle. Consumers can get great S3 parts and services online. We put much emphasis on the quality of different S3 parts and devices.