Audi A6 Brake Pad Set

The Audi A6 is an executive car manufactured in Neckarsulm, Germany by Audi. It appeals to drivers with high-quality brake pad set parts. The job of brake pad set parts is to transfer the kinetic energy of the car to the thermal energy which is caused by friction. Bad Audi A6 brake pad set parts will reduce the ability to stop the car and will cause grinding noises.

Whereas, the worn brake pad set parts need to be repaired or replaced for better A6 performance. There are some things you need to inspect before replacing Audi A6 brake pad set parts. You should look for the profile of the pads to ensure they are wearing evenly, and inspect cracking or scoring on the rotor surface. The steps to removing and replacing the Audi A6 brake pad set parts include: Raise the vehicle and remove the lug nuts off the wheel. Next, remove the caliper bolts and place the caliper to the side without damaging the Audi A6 brake line. Then remove the shims and pads. Next, press the caliper piston back into the housing. Later, add new Audi A6 anti-squeal shims and place the pads into place before installing new pads. After that, reinstall the caliper and torque the caliper bolts to spec. Finally, re-bleed all brakes. The vehicle will remain classic and prevailing for its useful Audi A6 brake pad set parts. We have nearly all types of Audi A6 brake pad set parts online in our catalog to give you a better car both inside and out.