Audi 80 Shock and Strut Boot

The Audi 80 was a compact executive vehicle made and marketed by Audi from the Volkswagen Group from 1966 to 1996. The car comes with plenty of quality vehicles and shock and strut boot parts. The strut boot has an accordion-type design that allows it to cover the shock shaft from any harm. It has the role of being an additional layer of protection for the polish rod that is connected to the piston. The 80 shock and strut boot parts must remain damage-free or else they can cause problems to the shock absorbers.

During the development of 80, many popular parts have been built. The shock and strut boot is one of them. While maintenance and upgrades for 80 shock and strut boot parts are required after long time of usage. 80 shock and strut boot parts are responsible for keeping any debris, dirt, and contaminants from coming in contact with the shocks/struts and avoiding corrosion. The removal process for 80 shock and strut boot parts is as follows: Disconnect the negative battery terminal, raise and support the vehicle, locate the shock and strut boot, and then remove the top shock/strut mounting bolts, remove the lower shock/strut mounting bolts, pull the shock/strut from its place, and finally pull the shock/strut boot off the shock absorber. Get helpful 80 parts at a low price online with just a few clicks. We have nearly all types of 80 parts in our catalogue to give you a better vehicle both inside and out.