Notes: Except 4 Wheel Steering;Includes Inner Tie Rods;with Hydraulic Power;Supplied without EVO Component;In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
Casting Material: Aluminum
Distance Between Mounting Holes (in): 13.438"
Electronic Variable Orifice (EVO): Without Rack-mounted EVO valve
Hose Port Type: O-Ring
Import or Domestic: Import
Input Shaft Diameter (in): 0.75"
Input Shaft Length (in): 1.187"
Number of Mounting Holes: 2
Pressure Port Thread Size: M14 x 1.5
Rack Length (in): 41.563"
Return Port Thread Size: M16 x 1.5
Steering Rack Finish: Black
Thread Length (in): 1.678"
Total Turns Lock to Lock: 3
Type: Complete Unit
Part Description: 2011 Infiniti G37 Remanufactured Hydraulic Power Rack and Pinion Complete Unit
Notes: w/o Sport Tune Susp; If after replacement of steering unit there are still issues w/the Pwr assist, inspect condition of the PS pump. This pum has two Int valves that, if too much debris is in the system, can score the Int finish of the housing itself-the material in the housing is softer than the material used in the valves. If the valves damage the housing the pump will leak & restrict assist to the steering unit.
UPC: 843613108189
Part Description: 2011 Infiniti G37 Remanufactured Rack and Pinion Assembly
Notes: w/o Sport Tuned Susp; Unit is equipped w/a electronic solenoid, this part is Incld.;(from 05/01/09); w/o Sport Tuned Susp; Unit is equipped w/a electronic solenoid, this part is Incld.
UPC: 843613109223
Part Description: 2011 Infiniti G37 Remanufactured Hydraulic Power Steering Rack and Pinion Assembly