Notes: 5.9 Ft Box, W/Lock Control; 6.5 Ft Box, W/Lock Control; 8 Ft Box, W/Lock Control; W/Lock Assist
Other Names: Handle, Lock
Item Dimensions: 7.9 x 5.4 x 5.4 inches
Item Weight: 1.40 Pounds
Fitment Type: Direct Replacement
Replaces: 25918361, 20880358, 25775280
Part Description: 2011 GMC Sierra 1500 Lock
More Info
Vehicle Fitment
2011 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$49.55MSRP: $74.76
You Save: $25.21 (34%)
FAQ for Tailgate Handle Repair
Q: How many bolts do you need to secure the lower hinges?
A:
You will need 4 bolts. (2 for each hinge).
By Bob
GM Specialist
03/12/2020
Q: What is the recommended bolt torque?
A:
The recommended bolt torque is 12 Nm (106 lb in). Note: loosen the bolt only.
By Omar
GM Specialist
02/12/2020
Q: Will I need to remove anything before installing the end-gate torque rod?
A:
Yes, you will need to remove the end-gate.
By Omar
GM Specialist
01/12/2020
Q: Will I need to remove anything before installing the lower hinge?
A:
Yes, you will need to remove the pickup box end gate.
By Bob
GM Specialist
01/12/2020
FAQ for Other Repair Info
Q: Will I need to remove anything before installation?
A:
Yes, you will need to remove the radiator air upper baffle/deflector. Disconnect the hood release cable from the Hood Latch and any electrical connectors.
Q: Do I need to disable anything before installing it?
A:
Yes, you will need to disable the supplemental inflatable restraint (SIR) system.
Q: Can the floor mats be flipped over to get them to fit other vehicles?
A:
No, the floor mats are made for specific vehicles and are cut out to only fit those certain vehicles.