Part Description: 2011 GMC Sierra 1500 Lock Assembly
More Info
Vehicle Fitment
2011 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$102.16MSRP: $154.13
You Save: $51.97 (34%)
FAQ for Hood Latch Repair
Q: Do I need any support while removing the hood?
A:
Yes. When a hood hold open device is being removed/installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
By Bob
GM Specialist
04/12/2020
Q: Does the replacement hinge need to be welded?
A:
The replacement hinges do not need to be welded, just bolted on.
By Bob
GM Specialist
02/12/2020
Q: What is the recommended bolt torque for the hood latch bolts?
A:
The recommended bolt torque is 9Nm (80 lb in).
By Omar
GM Specialist
02/12/2020
Q: What should I do before installing?
A:
Remove the hood. Remove the air inlet grille. Remove the hood open assist spring.
By Omar
GM Specialist
01/12/2020
Q: What is the proper bolt torque for the hood hinge bolts?
A:
upper hinge bolt: 25 Nm (18 lb-ft) lower hinge bolt: 25 nm (18 lb-ft).
By Omar
GM Specialist
01/12/2020
Q: What is the proper bolt torque for the hood hinge?
A:
The proper bolt torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/12/2020
Q: Will I need to remove anything before installation?
A:
Yes, you will need to remove the radiator air upper baffle/deflector. Disconnect the hood release cable from the hood latch and any electrical connectors.
By Bob
GM Specialist
30/11/2020
See more FAQs (2)
FAQ for Other Repair Info
Q: What is a simpler way to get the cable through?
A:
Attach a mechanic wire to the existing cable to ease the installation.