2011 GMC Sierra 1500 | Base, SLE, WT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
FAQ for Floor Pan Repair
Q: Can the floor mats be flipped over to get them to fit other vehicles?
A:
No, the floor mats are made for specific vehicles and are cut out to only fit those certain vehicles.
By Omar
GM Specialist
03/12/2020
Q: What can happen if you use the wrong size mats on a vehicle?
A:
If the wrong size mats are used they can interfere with the pedals causing unintended acceleration or braking.
By Bob
GM Specialist
02/12/2020
Q: When replacing mats what are things that should be avoided?
A:
You should avoid flipping mats over, placing anything on top, or stacking mats on top of each other.
By Bob
GM Specialist
01/12/2020
FAQ for Other Repair Info
Q: Will I need to remove anything before installation?
A:
Yes, you will need to remove the radiator air upper baffle/deflector. Disconnect the hood release cable from the Hood Latch and any electrical connectors.
Q: Do I need to disable anything before installing it?
A:
Yes, you will need to disable the supplemental inflatable restraint (SIR) system.
Q: Do I need to remove anything before installing it? (Chevrolet)
A:
Yes, you will need to remove the wheel assembly and the engine lower splash shield before installing.