Part Description: 2011 GMC Sierra 1500 Fender Liner
More Info
Vehicle Fitment
2011 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$81.54MSRP: $128.24
You Save: $46.70 (37%)
FAQ for Fender Splash Shield Repair
Q: Do I need to remove anything before installing it? (Chevrolet)
A:
Yes, you will need to remove the wheel assembly and the engine lower splash shield before installing.
By Bob
GM Specialist
03/12/2020
Q: Do I need to remove anything to install the engine splash shield?
A:
Yes, you will need to remove the left front wheelhouse liner.
By Bob
GM Specialist
03/12/2020
Q: How many bolts shield bolts does the splash shield need?
A:
You will need 2 bolts to firmly secure the splash shield. (bolt torque: 12 Nm (106 lb in)).
By Bob
GM Specialist
03/12/2020
Q: How many bolts do I need to firmly secure the splash shield?
A:
You will 4 bolts in total to secure the shield onto the car. (bolt torque: 5 Nm (44 lb in)).
By Omar
GM Specialist
02/12/2020
Q: What are the proper bolt torque measurements? (GMC)
A:
Front wheelhouse front liner bolt: 10 Nm (89 in-lb) Front wheelhouse outer bolt: 7nm (56 lb in).
By Omar
GM Specialist
02/12/2020
Q: How many plastic retainers does the splash shield need?
A:
You will need 2 plastic retainers to firmly secure the splash shield.
By Omar
GM Specialist
02/12/2020
Q: What is the proper bolt torque? (Chevrolet)
A:
The proper bolt torque is 10 nm (89 lb in).
By Bob
GM Specialist
01/12/2020
Q: Will I need to remove anything before installing it?
A:
No, you will not need to remove anything.
By Omar
GM Specialist
01/12/2020
Q: Will I need to remove anything before installation? (GMC)
A:
Yes, you will need to remove the tire, wheel assembly, and lower engine splash shield.
By Omar
GM Specialist
01/12/2020
Q: Will I need to remove any parts to install the splash shield?
A:
Yes, you will need to remove the front right wheelhouse liner.
By Omar
GM Specialist
30/11/2020
See more FAQs (9)
FAQ for Other Repair Info
Q: Will I need to remove anything before installation?
A:
Yes, you will need to remove the radiator air upper baffle/deflector. Disconnect the hood release cable from the Hood Latch and any electrical connectors.
Q: Do I need to disable anything before installing it?
A:
Yes, you will need to disable the supplemental inflatable restraint (SIR) system.
Q: Can the floor mats be flipped over to get them to fit other vehicles?
A:
No, the floor mats are made for specific vehicles and are cut out to only fit those certain vehicles.