FAQ for Door Seal Repair
Q: Do I need to remove anything before installing it? (Regular Cab)
A:
Yes, you will need to remove the front door sill plate.
By OmarGM Specialist
03/12/2020 Q: How many auxiliary sealing strip retainers are needed? (Extended Cab)
A:
You will need 4 auxiliary sealing strip retainers to firmly secure the strip.
By OmarGM Specialist
03/12/2020 Q: How many auxiliary sealing strips are needed? (Crew Cab)
A:
5sealing auxiliary strips are needed to firmly secure the sealing strip.
By BobGM Specialist
03/12/2020 Q: How do I align the weather strip evenly? (Crew Cab)
A:
Align the weather strip to the door opening with the 2 dots positioned on the upper right and left side or you can align the strip to the door opening with the bond joint positioned at the lower center of the door opening.
By BobGM Specialist
02/12/2020 Q: How do I align the weather strip? (Extended Cab)
A:
Align with the door opening with the 2 dots positioned on the upper right.
By OmarGM Specialist
02/12/2020 Q: How do I align the weather strip? (Regular Cab)
A:
Align the weather strip to the door opening, with the 2 dots positioned on the upper right and left side.
By BobGM Specialist
02/12/2020 Q: What if I can't use the original locating holes after removing the old weatherstrip? (Extended Cab)
A:
It may be necessary to drill new locating holes when installing a new weatherstrip.
By OmarGM Specialist
02/12/2020 Q: Will I need to remove anything before installing it? (Extended Cab)
A:
Yes, you will need to remove the rear access door trim panel.
By BobGM Specialist
01/12/2020 Q: Will I need to remove anything to install it? (Crew Cab)
A:
Yes, you will need to remove the push-in retainer at the top of the door.
By OmarGM Specialist
30/11/2020 Q: Will I need to remove anything before installing it? (Extended Cab)
A:
Yes, you will need to remove the rear sill plate, hinge pillar trim, windshield pillar molding, weather strip, and lock pillar trim.
By BobGM Specialist
30/11/2020 See more FAQs (6)