Notes: 5.9 Ft Box, Bed Side, W/Assist;5.9 Ft Box, Bed Side, W/O Assist; 6.5 Ft Box, Bed Side, W/Assist;6.5 Ft Box, Bed Side, W/O Assist; 8 Ft Box, Bed Side, W/Assist;8 Ft Box, Bed Side, W/O Assist; Bed Side, W/Assist;Bed Side, W/O Assist
Location: Passenger Side
Other Names: Hinge
Item Dimensions: 4.2 x 2.3 x 1.9 inches
Item Weight: 0.50 Pounds
Fitment Type: Direct Replacement
Part Description: 2011 GMC Sierra 1500 Hinge
More Info
Vehicle Fitment
2011 GMC Sierra 1500 | AT4, Base, Denali, Elevation, Hybrid, SL, SLE, SLT, WT, XFE | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Part Description: 2011 GMC Sierra 1500 Hinge Asm-Rear Side Door (LH)
More Info
Vehicle Fitment
2011 GMC Sierra 1500 | SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
FAQ for Door Hinge Repair
Q: Do I need to disable anything before installing it?
A:
Yes, you will need to disable the supplemental inflatable restraint (SIR) system.
By Omar
GM Specialist
04/12/2020
Q: What is the proper bolt torque?
A:
The proper bolt torque is 25 Nm (18 lb-ft) for upper and lower bolts.
By Omar
GM Specialist
02/12/2020
Q: What's the best way to remove/install door hinges?
A:
Replacing/installing one hinge at a time.
By Omar
GM Specialist
01/12/2020
FAQ for Other Repair Info
Q: Will I need to remove anything before installation?
A:
Yes, you will need to remove the radiator air upper baffle/deflector. Disconnect the hood release cable from the Hood Latch and any electrical connectors.
Q: Can the floor mats be flipped over to get them to fit other vehicles?
A:
No, the floor mats are made for specific vehicles and are cut out to only fit those certain vehicles.
Q: Do I need to remove anything before installing it? (Chevrolet)
A:
Yes, you will need to remove the wheel assembly and the engine lower splash shield before installing.