FAQ for Alloy Wheels Repair
Q: How do you clean the puncture mark?
A:
You clean the puncture site by using a hand reamer and reaming the puncture to be able to fill the hole.
By OmarGM Specialist
11/11/2021 Q: What is the maximum amount of corrosion that can be repaired?
A:
On a vehicle with less than 20,000 miles, the repairable corrosion would be 100mm or less. On a vehicle with more than 20,000 miles, the repairable corrosion would be 200mm.
By OmarGM Specialist
11/11/2021 Q: Why is it important to maintain the proper tire pressure?
A:
Having lower tire pressure or too much tire pressure can cause uneven wear on the tires and lower tread life. If the tired have the amount they should have they provide a smoother ride as they have the proper inflation for the tires to support the load imposed by the vehicle.
By OmarGM Specialist
10/11/2021 Q: How do you properly clean a tire?
A:
You properly clean a tire with a liner cleaner, cloth, and a scraper to remove dirt and debris.
By BobGM Specialist
10/11/2021 Q: What are some areas that should be checked before getting a wheel balanced?
A:
Before getting a wheel balanced it is important to check for missing balance weights, bent rims, tire wear, bead seating, stones in the tire tread, and tire irregularities.
By BobGM Specialist
10/11/2021 Q: What is the proper way to fix the air leaking from the wheel/tire caused by corrosion?
A:
Awater dunk tank leak test will need to be performed so you can determine where the leak is coming from, whether from the tire or the wheel itself. Once the affected area is found, you will need to sand the corrosion down until you get to material that is stable enough to finish correctly patching the wheel. After correctly patching the area, you will need to add sealant so that it fills the resurfaced bead.
By BobGM Specialist
10/11/2021 Q: Where is the most common for corrosion to occur on a wheel?
A:
The most common area for corrosion to be found is on the bead seat.
By BobGM Specialist
10/11/2021 Q: What is the proper way to fix the air leaking from the wheel/tire caused by corrosion?
A:
Awater dunk tank leak test will need to be performed so you can determine where the leak is coming from, whether from the tire or the wheel itself. Once the affected area is found, you will need to sand the corrosion down until you get to material that is stable enough to finish correctly patching the wheel. After correctly patching the area, you will need to add sealant so that it fills the resurfaced bead.
By OmarGM Specialist
09/11/2021 Q: Does the wheel/tire need to be rebalanced after getting the wheel repaired?
A:
Yes, the wheel will need to be rebalanced to avoid premature wear on the tires.
By BobGM Specialist
04/11/2021 Q: How can a leaking wheel be fixed?
A:
Aleaking wheel will require the wheel and tire to be removed from the vehicle. You will need to locate the leaking area and look to see if the wheel is bent or if it's a bad tire. If you determine the leak is coming from the wheel area, you will need to dismount the tire from the wheel. The rim will need to be scuffed so that the affected area is fixed. Apply tire silicone or sealant to the wheel where the affected area was repaired and mount the wheel back on the tire.
By OmarGM Specialist
04/11/2021 See more FAQs (11)