Part Description: 2011 Chevrolet Impala Crankshaft Balance
More Info
Vehicle Fitment
2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$86.21MSRP: $142.64
You Save: $56.43 (40%)
FAQ for Crankshaft Pulley Repair
Q: When should a flush be performed on subsystems?
A:
Aflush should be performed if any of the following components have failed: A/C, Radiators, Transmission Coolers, or Power Steering Systems.
By Omar
GM Specialist
10/11/2021
Q: Does GM recommend flushing the engine crankcase?
A:
No, GM does not recommend flushing the crankcase as it can damage internal components.
By Bob
GM Specialist
09/11/2021
Q: What are some GM products to clean and help maintain a vehicle clean?
A:
GM recommends the following part numbers: 12378401 car wash/wax soap, 89021822 glass cleaner, 12377966 cleaner wax, 1052929 wheel cleaner, and 88861431 odor eliminator.
By Omar
GM Specialist
09/11/2021
Q: Can a fluid-changing machine be used for flushing as well?
A:
No, the GM machines for fluid changing cannot be used to flush fluids.
By Omar
GM Specialist
08/11/2021
Q: What tool is recommended to flush automatic transmissions?
A:
GM recommends part number J45096 to flush automatic transmissions.
By Omar
GM Specialist
08/11/2021
FAQ for Other Repair Info
Q: Can the radiator be replaced as separate components?
A:
No, the Radiator is only replaced as a complete assembly. Only the radiator support can be replaced as separate components.
Q: What is the proper way to install the air filter compartment?
A:
Install the new air filter compartment followed by the water deflector cover making sure the tabs are securely in place. Re-install the air inlet grille and the three retainers holding it in place. Re-connect the windshield washer hose and reposition the seal for the rear portion of the hood.
Q: If water is found in the transmission what components must be replaced?
A:
If water is found in the transmission, the rubber seals, clutch plates and bands, nylon parts, and torque converter need to be replaced. Also, make sure to thoroughly clean the transmission/transmission case so no water is left behind.