Other Names: Compact Spare, Spare Wheel, Wheel Spare
Item Dimensions: 26.1 x 17.5 x 6.8 inches
Item Weight: 21.60 Pounds
Fitment Type: Direct Replacement
Part Description: 2011 Chevrolet Impala Wheel, Spare
More Info
Vehicle Fitment
2011 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2011 Chevrolet Impala Wheel, Alloy
More Info
Vehicle Fitment
2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2011 Chevrolet Impala Wheel, Steel
More Info
Vehicle Fitment
2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2011 Chevrolet Impala Spare Wheel
More Info
Vehicle Fitment
2011 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2011 Chevrolet Impala Wheel, Alloy
More Info
Vehicle Fitment
2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Alloy Wheels Repair
Q: Does the wheel/tire need to be rebalanced after getting the wheel repaired?
A:
Yes, the wheel will need to be rebalanced to avoid premature wear on the tires.
By Omar
GM Specialist
11/11/2021
Q: What is the proper way to fix the air leaking from the wheel/tire caused by corrosion?
A:
Awater dunk tank leak test will need to be performed so you can determine where the leak is coming from, whether from the tire or the wheel itself. Once the affected area is found, you will need to sand the corrosion down until you get to material that is stable enough to finish correctly patching the wheel. After correctly patching the area, you will need to add sealant so that it fills the resurfaced bead.
By Bob
GM Specialist
11/11/2021
Q: What is the proper way to fix the air leaking from the wheel/tire caused by corrosion?
A:
Awater dunk tank leak test will need to be performed so you can determine where the leak is coming from, whether from the tire or the wheel itself. Once the affected area is found, you will need to sand the corrosion down until you get to material that is stable enough to finish correctly patching the wheel. After correctly patching the area, you will need to add sealant so that it fills the resurfaced bead.
By Omar
GM Specialist
10/11/2021
Q: What do you look for when inspecting the inside of the tire?
A:
You are looking for any damage that has penetrated the inside allowing air to escape.
By Bob
GM Specialist
10/11/2021
Q: How can a leaking wheel be fixed?
A:
Aleaking wheel will require the wheel and tire to be removed from the vehicle. You will need to locate the leaking area and look to see if the wheel is bent or if it's a bad tire. If you determine the leak is coming from the wheel area, you will need to dismount the tire from the wheel. The rim will need to be scuffed so that the affected area is fixed. Apply tire silicone or sealant to the wheel where the affected area was repaired and mount the wheel back on the tire.
By Bob
GM Specialist
10/11/2021
Q: What happens after filling and repairing the puncture?
A:
After repairing the puncture, you will need to buff the area so you can add cement. Then, put the tire back on the wheel and use a tire safety cage to ensure the tire has been repaired properly and no air is escaping.
By Omar
GM Specialist
09/11/2021
Q: How do you clean the puncture mark?
A:
You clean the puncture site by using a hand reamer and reaming the puncture to be able to fill the hole.
By Bob
GM Specialist
09/11/2021
Q: How do you properly clean a tire?
A:
You properly clean a tire with a liner cleaner, cloth, and a scraper to remove dirt and debris.
By Omar
GM Specialist
09/11/2021
Q: What are some areas that should be checked before getting a wheel balanced?
A:
Before getting a wheel balanced it is important to check for missing balance weights, bent rims, tire wear, bead seating, stones in the tire tread, and tire irregularities.
By Omar
GM Specialist
09/11/2021
Q: What are the three main steps of tire puncture repair?
A:
The three basic steps are removing and inspecting the tire, filling the puncture, and sealing the inner liner to prevent air loss.
By Omar
GM Specialist
09/11/2021
See more FAQs (11)
FAQ for Other Repair Info
Q: What is the proper way to remove old frame bushings?
A:
The proper way to remove old frame bushings is by first raising and supporting the vehicle so you have access to remove the intermediate shaft from the steering gear sub shaft. Once that is removed you will need to remove the frame bolts and slowly lower the rear of the frame so that you have access to remove the upper and lower insulators.
Q: When the brake pedal is applied can noise be heard?
A:
If the problem is noise, perform a vehicle inspection of the brake rotors and pads. If the pads are unevenly worn from side to side or inner to outer, replace the brake pads. If the brake pads are not worn, burnish brakes by performing 10-15 stops from 35-40 mph drives. Please allow cooling times in between stops.