Notes: Z06, Zr1, Grand Sport & 427, W/Grand Sport, W/Dry Sump Sys;Z06, Zr1, Grand Sport & 427, W/Grand Sport, W/O Dry Sump Sys
Location: Driver Side
Other Names: Rear Fender Liner
Item Dimensions: 13.6 x 12.3 x 9.8 inches
Item Weight: 2.30 Pounds
Fitment Type: Direct Replacement
Replaces: 25954137
Part Description: 2011 Chevrolet Corvette Rear Fender Liner
More Info
Vehicle Fitment
2011 Chevrolet Corvette | Grand Sport | 8 Cyl 6.2 L GAS
FAQ for Fender Splash Shield Repair
Q: What is the procedure to replace a wheelhouse extension?
A:
Start by removing the overlapping plastic retainer from the front wheelhouse liner, and remove the appropriate lower valence panel piece.
By Bob
GM Specialist
10/12/2021
Q: How many screws does the front wheelhouse liner have?
A:
The front wheelhouse (rear liner) has 1 screw. Tighten the screw to 2 Nm.
By Bob
GM Specialist
09/12/2021
Q: How many bolts does the front wheelhouse liner have?
A:
The front wheelhouse liner has 2 bolts. Tighten bolts to 9 Nm.
By Bob
GM Specialist
01/12/2021
Q: How many bolts does the rear wheelhouse panel liner have?
A:
The rear wheelhouse panel liner has a total of 7 bolts.
By Omar
GM Specialist
01/12/2021
FAQ for Other Repair Info
Q: What is the hood primary latch release installation procedure?
A:
Route the cables through the opening in the dash panel, install the screws which mount the hood release handle, and install the cable grommet. Connect the cables to the latches, install the hood latches, and verify the operation latches.
Q: How many bolts hold the lower and upper hinge in place?
A:
There are 4 bolts holding the lower hinge and 4 bolts holding the upper hinge in place, 8 total bolts.
Q: What can happen if you use the wrong size mats on a vehicle?
A:
If the wrong size mats are used they can interfere with the pedals causing unintended acceleration or braking.