< Back ×
My Vehicle Change Vehicle
2011 Cadillac Escalade ESV
< Back to View All
Relays, Wiring & Connectors
- Department
- Prices
OEM (Genuine) 2011 Cadillac Escalade ESV Connector
PartNumber: 12191503
Product Specifications- Notes: GMC W/Denali, Cadillac, Towing Receptical
- Item Dimensions: 4.2 x 4.3 x 4.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Cadillac Escalade ESV Connector
Vehicle Fitment- 2011 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$55.21 MSRP:$83.28You Save: $28.07 (34%)
FAQ for Trailer Hitch Connector Repair
Q: What is the procedure to install an aftermarket trailer brake controller?
A:
The procedure to install an aftermarket trailer brake controller is to do the following: place the terminal on the larger of 2 studs at the front, Locate Connector, locate trailer brake control circuits, pull the trailering wire harness down, match the vehicle harness label circuit functions to the trailer brake controller functions, after completing open the hood and locate the red wire that is taped, break the tape on the red/black and remove the lid from the electrical center.
By Bob
GM Specialist
04/10/2021Q: How do you connect circuit for Auxiliary power?
A:
Locate the red/black wire looped and taped to the chassis, break the tape and route the wire to the front of the underhood, place terminal on the smaller of 2 studs and secure it with an M6 fastener.
By Bob
GM Specialist
04/10/2021Q: How do you connect an aftermarket trailer brake controller?
A:
Locate Connector, locate the trailer brake control circuits, pull the trailering wire harness down, and match the vehicle harness label circuit functions to the trailer brake controller functions, break the tape on the red/black and remove the lid from the electrical center, and Place terminal on the larger of 2 studs at the front of the electrical center.
By Omar
GM Specialist
04/10/2021