2011 Cadillac DTS Crossmember Bushing

Install the fasteners retaining the rear transaxle mount to the bracket, and the fastener retaining the front engine mount to the engine frame. Install the bracket to retain the power steering line to the engine frame, and the clips retaining the power steering line along the engine frame rail. Connect the wiring harness to the heat shield, and install the steering gear heat shield. Finally install the secondary air injection pump, the brake pressure modulator valve, the ESC sensor link, the front air deflector, ball joints, the front tires, wheels, and the stabilizer shaft.

Remove the front tires, wheels, stabilizer shaft, bolts, ball joints, the front air deflector, and the brake pressure modulator. Disconnect the ESC sensor links from the lower control arm ball studs. Remove the secondary air injection pump assembly, and the steering gear heat shield fasteners, and disconnect the electrical harness from the heat shield. Remove the brackets, and the retainer, and retain the steering gear to the body. Remove the fastener retaining the front engine mount to the engine frame, and the fasteners retaining the rear transaxle mount to the engine frame. Remove the engine frame insulator bolts retaining the engine frame to the vehicle, and raise the vehicle away from the engine frame.