Wiper Blade Connection Type: Nine by Three and Nine by Four Hooks
Part Description: 2010 GMC Yukon 22" Black Beam Style Wiper Blade
More Info
Vehicle Fitment
2010 GMC Yukon | All Trims | All Engines
FAQ for Wiper Blade Repair
Q: How to clean Wiper Blade Element?
A:
You can lift the wiper blade assemblies off of the windshield glass, clean the wiper blade element with a clean cloth saturated with full-strength washer solution, rinse the wiper blade assemblies with water, and place the wiper blade assemblies back onto the windshield glass.
By Bob
GM Specialist
01/11/2022
Q: What is the preliminary procedure for Windshield Wiper Blade removal?
A:
You can raise the wiper arm to the full-up position off the windshield.
By Bob
GM Specialist
01/11/2022
Q: What should I notice in Wiper Chatter repair?
A:
Some vehicles may exhibit a condition where the windshield wiper blades chatter or wipe unevenly. Several different conditions can cause the wiper blade to chatter. To completely repair wiper blade chatter, all of the following should be checked and repaired as necessary, The windshield glass must be clean, the wiper blade element must be clean, the wiper arm tip pressure must be within specification, the wiper blade element set must be within specifications.
By Bob
GM Specialist
01/11/2022
Q: What is the preliminary procedure for the Rear Window Wiper Blade removal?
A:
You can lift the rear wiper arm from the rear liftgate glass, detach the rear window wiper blade from the rear window wiper arm, carefully set the rear window wiper arm on the glass, replace the rear window wiper blade, electrically park the rear window wiper arm into the rear wiper arm park ramp, cycle the ignition key off.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the preliminary procedure for the Windshield Washer Solvent Level Indicator removal?
A:
You can remove the Windshield Washer container, pry the windshield washer solvent level indicator from the side of the washer container, and discard the old windshield washer solvent level indicator grommet.
Q: What is the preliminary procedure for the Rear Window Washer Pump removal?
A:
You can remove the windshield washer container, pry the windshield washer solvent pump, and discard the old rear washer solvent pump grommet.
Q: How to install the Windshield Washer Solvent Container?
A:
You can install the left front wheel, the left front wheelhouse liner, the windshield washer solvent cap, the auxiliary battery tray, the upper windshield washer container bolt, the upper windshield washer solvent container bolts, the windshield washer solvent container assembly.