Part Description: 2010 GMC Yukon Panel-Intermediate Floor
More Info
Vehicle Fitment
2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
FAQ for Floor Pan Repair
Q: How to install the Floor Panel Heat Shield?
A:
You can install the catalytic converter, the muffler assembly, the left front floor panel exhaust heat shield nuts and heat shield, the exhaust heat shield nuts and heat shields, the exhaust heat shield nuts and heat shields, the rear floor panel exhaust heat shield nuts and heat shield.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Floor Panel Heat Shield?
A:
You can remove the catalytic converter, the muffler assembly, the left front floor panel exhaust heat shield nuts and heat shield, the exhaust heat shield nuts and heat shields, the exhaust heat shield nuts and heat shields, the rear floor panel exhaust heat shield nuts, and heat shield.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the heat shield nuts?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the drying method for Floor Carpet?
A:
If you observe puddles of liquid on the carpet face, use a wet vacuum to remove the excess moisture. You can blot the face of the carpet with a towel to absorb as much moisture as possible, point a fan at the affected area and air dry the carpet.
By Bob
GM Specialist
29/10/2022
Q: What should I notice in Eliminating Unwanted Odors in Vehicles?
A:
This product leaves no residual scent and should not be used as an air freshener. This product may result in the permanent elimination of an odor and may be preferable to customers whose allergies make them sensitive to perfumes. This product may effectively remove odors when directly contacting the odor source. In cases such as water leaks, use this product with diagnostic procedures to first eliminate the primary cause of the odor. Then use further applications on the residual odor to permanently correct the vehicle condition.
By Bob
GM Specialist
29/10/2022
Q: What is the recommended torque for the cargo tie-down loop bolt?
A:
The recommended torque is 35 Nm (25 LB ft).
By Bob
GM Specialist
29/10/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How to install the Spare Wheel Hoist?
A:
You can install the Spare Tire Hoist shaft guide to the bumper, the hoist to the crossmember, the bolt, the collar to the hoist, and the shaft to the hoist.
Q: How many Front Floor Console Cup Holder screws does the Front Floor Console Cup Holder have?
A:
It has a total of 3 Front Floor Console Cup Holder screws.
Q: How many front side door hinge upper bolts does Front Side Door Upper Hinge and Lower Hinge have?
A:
It has a total of 3 front side Door Hinge upper bolts.