FAQ for Control Arm Repair
Q: How to remove the Lower Control Arm?
A:
You can remove the tire and wheel, the stabilizer shaft link, the wheel drive shaft, the lower ball joint retaining nut, the lower shock module bolts, the lower ball joint, the lower control arm nuts and washers, the control arm bolts, and the control arm.
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the upper control arm bolts?
A:
The recommended torque is 190 Nm (140 lb-ft).
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the upper control arm retaining nut?
A:
The recommended torque is 160 Nm (118 lb-ft).
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the wheel speed sensor brackets?
A:
The recommended torque is 9 Nm (80 lb in).
By BobGM Specialist
29/10/2022 Q: How to install the Lower Control Arm?
A:
You can install the tire and wheel, the stabilizer shaft link, the wheel drive shaft, the lower ball joint retaining nut, the lower shock module bolts, the lower ball joint, the lower control arm nuts and washers, the control arm bolts, and the control arm.
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the lower control arm to axle bolts?
A:
The recommended torque is 100 Nm (74 lb-ft) plus 55 degrees.
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the lower control arm to frame bolts?
A:
The recommended torque is 100 Nm (74 lb-ft) plus 55 degrees.
By BobGM Specialist
29/10/2022 Q: How to install the Upper Control Arm?
A:
You can install the upper control arm, and the upper control arm bolts, connect the upper control arm to the steering knuckle, install the new nut to the upper ball joint stud, and install the retaining bolts for the brake hose and wheel speed sensor brackets, install the tire and wheel.
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the upper control arm nut?
A:
The recommended torque is 190 Nm (140 lb-ft).
By BobGM Specialist
29/10/2022 Q: How to remove the Upper Control Arm?
A:
You can remove the tire and wheel, the retaining bolt for the brake hose and the wheel speed sensor brackets, the nut at the upper ball joint, disconnect the upper control arm from the steering knuckle, remove the upper control arm nuts and the adjustment cams, the upper control arm.
By BobGM Specialist
29/10/2022 See more FAQs (11)