2010 GMC Terrain | SLE, SLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
FAQ for Throttle Body Repair
Q: What should you do before inserting fingers into the throttle bore?
A:
You should turn OFF the ignition before inserting your fingers into the throttle bore.
By Bob
GM Specialist
02/11/2022
Q: How do you clean the throttle body?
A:
You can remove the air cleaner outlet duct resonator, inspect the throttle body bore and the throttle valve plate for deposits, clean the throttle body bore and the throttle valve plate, install the air cleaner outlet duct resonator and perform the throttle relearn procedure.
By Bob
GM Specialist
02/11/2022
Q: How many fasteners does the throttle body assembly have?
A:
The throttle body assembly has a total of 4 fasteners.
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque when you tighten the throttle body assembly fasteners?
A:
You can tighten the fasteners to 10 Nm (89 lb in).
By Bob
GM Specialist
02/11/2022
Q: What should you remove before replacing the Throttle Body Assembly?
A:
You should remove the outlet duct.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the first step for replacing the Intake Manifold?
A:
The first step is to disconnect the evaporative emission canister purge tube at the Intake Manifold side only.
Q: How many fasteners does the air cleaner have?
A:
The air cleaner has a total of 4 fasteners.
Q: What is the recommended torque when you tighten the manifold absolute pressure sensor fastener?