< Back ×
My Vehicle Change Vehicle
2010 GMC Terrain
< Back to View All
Cameras & Driver Safety
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Terrain Reverse Sensor
PartNumber: 92229605
Product Specifications- Notes: 2010-15
- Other Names: Park Sensor, Reverse Sensor, Sensor
- Item Dimensions: 2.5 x 1.8 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Terrain Reverse Sensor
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$204.30 MSRP:$308.23You Save: $103.93 (34%)
Dorman® Parking Assist Sensor for 2010 GMC Terrain
PartNumber: 684-061Product Specifications- Connector Gender: Male
- Mounting Hardware Included: No
- Package Contents: 1 Parking Aid Sensor
- Terminal Gender: Male
- Terminal Quantity: 3
- Terminal Type: Pin
- Universal Or Specific Fit: Specific
- UPC: 885484584013
- Wiring Harness Included: No
- Part Description: 2010 GMC Terrain Parking Assist Sensor
Vehicle Fitment- 2010 GMC Terrain | All Trims | All Engines
$31.01
FAQ for Parking Sensors Repair
Q: How do you replace the Rear Object Sensor Housing?
A:
You can remove the rear fascia, disconnect the sensor harness, remove the sensor from the sensor housing, sand/grind sonic weld plastic residue from the fascia, apply structural adhesive epoxy, Lord Fusor(TM) 127EZ or equivalent to fascia at the mating surface, install the sensor housing to the fascia, allow adhesive to cure, install the sensor to the sensor housing, connect the electrical harness and install the rear fascia.
By Bob
GM Specialist
02/11/2022Q: How do you install the Rear Object Sensor?
A:
You can paint the rear object sensor, ensure the paint does not exceed 6 mils, insert the sensor into the housing, connect the electrical connector to the rear object sensor and install the rear bumper fascia.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the Rear Object Sensor?
A:
The procedure is to remove the rear bumper fascia, disconnect the electrical connector from the rear object sensor, lift the locking tabs on the housing and remove the rear object sensor.
By Bob
GM Specialist
02/11/2022Q: How many retainers does the Rear Object Alarm Module have?
A:
The Rear Object Alarm Module has a total of 3 retainers.
By Bob
GM Specialist
01/11/2022Q: How many screws does the information center telltale assembly have?
A:
The information center telltale assembly has a total of 2 screws.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the information center telltale assembly screws?
A:
You can tighten the screws to 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Rear Object Alarm Module?
A:
You should remove the left body side trim panel.
By Bob
GM Specialist
01/11/2022See more FAQs (2)