< Back ×
My Vehicle Change Vehicle
2010 GMC Terrain
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2010 GMC Terrain Lift Gate
PartNumber: 84680006
Product Specifications- Other Names: Lift Gate
- Item Dimensions: 62.7 x 55.7 x 10.9 inches
- Item Weight: 45.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22756614, 25959031
- Part Description: 2010 GMC Terrain Lift Gate
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$948.35 MSRP:$1430.69You Save: $482.34 (34%)
FAQ for Liftgates Repair
Q: What should you do when the last retainer is released?
A:
You should lift the bottom edge of the applique and remove it from under the edge of the rear-end spoiler.
By Bob
GM Specialist
01/11/2022Q: How many retainers does the tie wrap have?
A:
The tie wrap has a total of 8 retainers.
By Bob
GM Specialist
01/11/2022Q: What must you do before the hydraulic fluid level is inspected?
A:
You must reset the liftgate hydraulic actuator pump in the horizontal position for one minute.
By Bob
GM Specialist
01/11/2022Q: How do you bleed the Liftgate Hydraulic System?
A:
You can cycle the liftgate 3-5 times, inspect the fluid level and refer to Liftgate Hydraulic System Refilling.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Liftgate Window?
A:
The procedure is to open the liftgate, remove the liftgate lower trim finish panel, disconnect the electrical connectors, remove the rear window wiper arm, remove the rear end spoiler, cover the upper dash pad, the defroster outlets, the A/C outlets, seats, and carpeting, cut the lace from the sides and the top edge of the window, remove the window from the urethane adhesive, remove the bottom corners of the window and remove the window.
By Bob
GM Specialist
01/11/2022Q: What must you do before reinstalling the trim panels that cover the liftgate hydraulic actuator pump and actuator/hose assemblies?
A:
You must test the liftgate hydraulic system components for proper operation.
By Bob
GM Specialist
01/11/2022Q: What should you do before the final assembly of trim panels?
A:
You should inspect the liftgate hydraulic system for proper operation.
By Bob
GM Specialist
01/11/2022Q: How many nuts does the liftgate hydraulic pump have?
A:
The liftgate hydraulic pump has a total of 3 nuts.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Liftgate Side Upper Sensor (Terrain)?
A:
You should remove the upper liftgate trim finish panel.
By Bob
GM Specialist
01/11/2022Q: How do you install the Liftgate Window?
A:
You can install the liftgate window into the opening, install the rear end spoiler, install the rear window wiper arm, connect the liftgate window defogger electrical connectors, install the liftgate lower trim finish panel, remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim and close the liftgate.
By Bob
GM Specialist
01/11/2022See more FAQs (18)