< Back ×
My Vehicle Change Vehicle
2010 GMC Terrain
< Back to View All
Fuel Systems
- Department
- Prices
OEM (Genuine) 2010 GMC Terrain Injector
PartNumber: 12629927
Product Specifications- Notes: Equinox, Terrain; 3.0l
- Other Names: Injector
- Item Dimensions: 4.7 x 4.6 x 1.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Terrain Injector
Vehicle Fitment- 2010 GMC Terrain | SLE, SLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$91.51 MSRP:$172.68You Save: $81.17 (48%)OEM (Genuine) 2010 GMC Terrain Injector
PartNumber: 12608362
Product Specifications- Notes: Equinox, Terrain; 2.4l
- Other Names: Injector
- Item Dimensions: 5.1 x 4.3 x 3.4 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Terrain Injector
Vehicle Fitment- 2010 GMC Terrain | SLE, SLT | 4 Cyl 2.4 L GAS
$97.63 MSRP:$184.22You Save: $86.59 (48%)
FAQ for Fuel Injector Repair
Q: What should you remove before replacing the Fuel Injector and Fuel Rail?
A:
You should remove the intake manifold and the fuel feed intermediate pipe.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the piston oil nozzle fastener?
A:
You can tighten the fastener to 15 Nm (11 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you install the Direct Fuel Injector (LAF)?
A:
You can install new fuel injector retainers and install the fuel injection fuel rail assembly.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Direct Fuel Injector (LAF)?
A:
The procedure is to relieve the high side fuel system pressure, remove the fuel injection fuel rail assembly, remove and discard the fuel injector retainers, and clean and inspect the fuel rail and injectors.
By Bob
GM Specialist
01/11/2022Q: How many fasteners does the fuel injection fuel rail have?
A:
The fuel injection fuel rail has a total of 4 fasteners.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the fuel injection fuel rail fasteners?
A:
You can tighten the fasteners to 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the purpose of rotating the crankshaft?
A:
The purpose is to gain access to piston oil nozzle bolts.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Piston Oil Nozzle?
A:
You should remove the oil pan.
By Bob
GM Specialist
01/11/2022See more FAQs (3)