Part Description: 2010 GMC Sierra 3500 HD Module Asm, Windshield Wiper System
More Info
Vehicle Fitment
2010 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Windshield Wiper Motors Repair
Q: What should be done before servicing the Windshield Wiper System Module?
A:
You should remove the wiper arms and then remove the air inlet grille panels.
By Bob
GM Specialist
01/11/2022
Q: How many bolts attach to the Windshield Wiper System Module Assembly?
A:
There are 3 bolts attached to the Windshield Wiper System Module Assembly.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the windshield wiper system module assembly bolts?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noted when servicing the Windshield Washer Pump?
A:
You should use full-strength windshield washer solvent for a lubricant on the pump spout to ease the installation of the new Washer Pump into the new grommet.
Q: What should be noted when servicing the Wiper Chatter?
A:
The windshield glass must be clean. The Wiper Blade element must be clean. The wiper arm tip pressure must be within specifications. The wiper blade element set must be within specifications.
Q: What should be done before servicing the Windshield Washer Solvent Level Switch?
A:
You should remove the windshield washer container, release the level sensor from the washer container and then discard the level indicator grommet.