Part Description: 2010 GMC Sierra 3500 HD Wiper Arm
More Info
Vehicle Fitment
2010 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Windshield Wiper Arms Repair
Q: What should be noted when servicing the Windshield Washer Blade Assembly?
A:
You should pinch the 2 outer tabs on the arm and then rotate the blade rearward and slide the blade forward to release the wiper blade from the wiper arm assembly.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the Windshield Washer Arm nuts?
A:
The recommended torque is 30 N.m (22 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noted when servicing the Windshield Washer Pump?
A:
You should use full-strength windshield washer solvent for a lubricant on the pump spout to ease the installation of the new Washer Pump into the new grommet.
Q: What should be noted when servicing the Wiper Chatter?
A:
The windshield glass must be clean. The Wiper Blade element must be clean. The wiper arm tip pressure must be within specifications. The wiper blade element set must be within specifications.
Q: What should be done before servicing the Windshield Washer Solvent Level Switch?
A:
You should remove the windshield washer container, release the level sensor from the washer container and then discard the level indicator grommet.