Part Description: 2010 GMC Sierra 3500 HD Washer Hose
More Info
Vehicle Fitment
2010 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$11.81MSRP: $21.38
You Save: $9.57 (45%)
FAQ for Windshield Washer Hose Repair
Q: What should be done before servicing the windshield washer hose?
A:
You should open the hood, remove the air inlet grille panel, remove the left front wheelhouse liner, place a clean suitable container under the vehicle before disconnecting the washer hose, and then disconnect the washer hose from the washer pump spout.
By Bob
GM Specialist
01/11/2022
Q: What should be noted when servicing the Windshield Washer Pump Hose Assembly?
A:
You should route the new hose to the same location where the old hose was removed.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noted when servicing the Windshield Washer Pump?
A:
You should use full-strength windshield washer solvent for a lubricant on the pump spout to ease the installation of the new Washer Pump into the new grommet.
Q: What should be noted when servicing the Wiper Chatter?
A:
The windshield glass must be clean. The Wiper Blade element must be clean. The wiper arm tip pressure must be within specifications. The wiper blade element set must be within specifications.
Q: What should be done before servicing the Windshield Washer Solvent Level Switch?
A:
You should remove the windshield washer container, release the level sensor from the washer container and then discard the level indicator grommet.