FAQ for Power Seat Switch Repair
Q: What should be done before servicing the inflatable restraint seat position sensor?
A:
You should disable the supplemental inflatable restraint (SIR) system and then remove the driver's seat.
By BobGM Specialist
01/11/2022 Q: How many bolts attach to the Rear Seat Back Cushion Frame?
A:
There are 4 bolts attached to the Rear Seat Back Cushion Frame.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Inflatable Restraint Seat Position Sensor screws?
A:
The recommended torque is 3 N.m (25 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Front Center Seat Anchor Plate bolts?
A:
The recommended torque is 43 N.m (32 lb-ft).
By BobGM Specialist
01/11/2022 Q: What should be noted when servicing the Front Seat Adjuster Switch Knob?
A:
You should pull outward from the seat to remove it. If too tight, a flat-bladed tool may be used to help disengage the knob from the switch.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the front memory seat switch screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: How many screws attach to the Front Memory Seat Switch?
A:
There are 2 screws attached to the Front Memory Seat Switch.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Front Seat Center Latch Side Belt?
A:
You should remove the driver seat, the jack stowage cover, the rear window lower trim, and the rear inner panel carpet.
By BobGM Specialist
01/11/2022 Q: How many screws attach to the Inflatable Restraint Seat Position Sensor?
A:
There are 2 screws attached to the Inflatable Restraint Seat Position Sensor.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Rear Seat Latch?
A:
You should remove the rear seat, separate the rear split bench seat, remove the rear seat back recliner cover, remove the rear seat cushion side outer cover, remove the rear seat back cover and pad, and the rear seat cushion cover and pad.
By BobGM Specialist
01/11/2022 See more FAQs (5)