FAQ for Parking Brake Cable Repair
Q: How to remove the Parking Brake Cable Guide?
A:
You should remove the park brake cable guide bolt from the frame, the park brake cable guide, and the park brake cable guide from the park brake cable.
By BobGM Specialist
02/11/2022 Q: How to remove the Parking Brake Rear Cable?
A:
You should disable the park brake cable automatic adjuster, disconnect the left park brake cable from the intermediate cable equalizer bar, release the left park brake cable from the frame bracket, remove the park brake cable clip bolt, release the park brake cable from the rear axle bracket, disconnect the park brake cable eye and then remove the park brake cable eye.
By BobGM Specialist
02/11/2022 Q: How to install the Parking Brake Intermediate Cable?
A:
You should connect the left park brake cable and the right park brake cable to the equalizer bar, connect the front park brake cable, enable the park brake cable automatic adjuster and then adjust the parking brake.
By BobGM Specialist
02/11/2022 Q: How to remove the Parking Brake Intermediate Cable?
A:
You should disconnect the front park brake cable from the intermediate cable connector, disconnect the left park brake cable and then remove the intermediate park brake cable.
By BobGM Specialist
02/11/2022 Q: How to disable the Parking Brake Cable Adjuster?
A:
You should raise and support the vehicle, hold the pedal in the full upward position, pull rearward on the front park brake cable, insert a thin tool on an upward angle through the hole in the front of the pedal assembly, slowly release the cable and then remove the component that requires service.
By BobGM Specialist
02/11/2022 Q: How to enable the Parking Brake Cable Adjuster?
A:
You should hold the park brake pedal in the full upward position, pull rearward on the front park brake cable until the tension is released from the tool installed in the pedal assembly, remove the tool, release the park brake cable, lower the vehicle and then apply and release the park brake pedal 3 times.
By BobGM Specialist
02/11/2022 Q: QHow to remove the Parking Brake Rear Cable?
A:
You should disconnect the right park brake cable from the intermediate cable equalizer bar, remove the park brake cable clip bolt, the park brake cable from the cable guides, the brake shoes, the parking brake cable from the backing plate, and the park brake cable from the vehicle.
By BobGM Specialist
02/11/2022 Q: How to install the Parking Brake Rear Cable?
A:
You should connect the left park brake cable eye, install the park brake cable to the rear axle bracket, install the park brake cable clip bolt, connect the left rear park brake cable, insert the park brake cable conduit, enable the park brake cable automatic adjuster and then adjust the parking brake.
By BobGM Specialist
02/11/2022 Q: How to install the Parking Brake Cable Guide?
A:
You should install the park brake cable guide to the park brake cable, the park brake cable guide, and the park brake cable guide bolt to the frame.
By BobGM Specialist
02/11/2022 See more FAQs (4)