Part Description: 2010 GMC Sierra 3500 HD Booster Sensor
More Info
Vehicle Fitment
2010 GMC Sierra 3500 HD | AT4, Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L GAS
$46.61MSRP: $87.96
You Save: $41.35 (48%)
FAQ for Oil Pressure Sensor Repair
Q: How to install the Engine Oil Pressure Sensor and/or Switch?
A:
You should apply a sealant to the threads of the new oil pressure sensor, install the oil pressure sensor, connect the engine harness electrical connector to the oil pressure sensor and then install the intake manifold.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Engine Oil Pressure Sensor and/or Switch?
A:
You should remove the intake manifold, disconnect the engine harness electrical connector, remove the oil pressure sensor and washer and then remove the oil pressure sensor and washer.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Engine Oil Level Sensor and/or Switch?
A:
You should install the oil level sensor to the oil pan, connect the engine harness electrical connector, ensure that the oil pan drain plug is tight, fill the engine with new engine oil and then start the engine and inspect for leaks.
Q: How to install the Accelerator Pedal Position Sensor?
A:
You should install the accelerator pedal bolts, connect the APP sensor electrical connector and then connect a scan tool to the diagnostic port to test for proper throttle-opening and throttle-closing range.
Q: How to install the Camshaft Position Sensor?
A:
You should install the O-ring seal onto the sensor, the CMP sensor to the front cover, the CMP sensor wire harness, and the 3 CMP sensor wire harness bolts.