Part Description: 2010 GMC Sierra 3500 HD Occupant Module
More Info
Vehicle Fitment
2010 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$570.68MSRP: $860.94
You Save: $290.26 (34%)
FAQ for Occupant Detection Sensor Repair
Q: What should be noted when servicing the Inflatable Restraint Front Passenger Presence Sensor?
A:
You should lay the seat on its side, unhook the connector from the retainer on the seat frame and push up through the seat pan and then disconnect and remove the sensor.
By Bob
GM Specialist
01/11/2022
Q: What should be noted when servicing the Front Seat Cushion Cover and Pad?
A:
You should lay the seat on its side, unhook the connector from the retainer on the seat frame and push it up through the seat pan and then disconnect and remove the sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be done before servicing the inflatable restraint seat position sensor?
A:
You should disable the supplemental inflatable restraint (SIR) system and then remove the driver's seat.
Q: How to service the Front Seat Cushion Heater Element?
A:
You should disconnect the heater element and peel away from the cushion to remove and then re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed.
Q: What is the recommended torque for the Front Seat Climate Control Module bolts?