< Back ×
My Vehicle Change Vehicle
2010 GMC Sierra 3500 HD
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Brands
- Prices
Dorman® OE Solutions Diesel Oil Cooler for 2010 GMC Sierra 3500 HD
PartNumber: 918-400Product Specifications- Color or Finish: Silver
- Cooler Inlet Size: 0.72"
- Cooler Outlet Size: 0.72"
- Cooling Row Quantity: 11
- Core Tube Width: 0.155"
- Depth: 2.35"
- Diameter (in): 0.72"
- Finish: Brushed Metal
- Height: 3.281"
- Inlet Fitting Type: Female
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Aluminum
- OE Part Number: 12649227, 19210615
- Outlet Fitting Type: Female
- Thickness (in): 3.096"
- UPC: 019495387121
- Width (in): 3.096"
- Part Description: 2010 GMC Sierra 3500 HD OE Solutions Diesel Oil Cooler
Vehicle Fitment- 2010 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.6L
$248.31
OEM (Genuine) 2010 GMC Sierra 3500 HD Cooler Asm, Engine Oil
PartNumber: 19210615
Product Specifications- Notes: 6.6 Liter Diesel
- Other Names: Oil Cooler
- Item Dimensions: 10.8 x 10.4 x 8.2 inches
- Item Weight: 13.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97329038, 97351829, 97262115
- Part Description: 2010 GMC Sierra 3500 HD Cooler Asm, Engine Oil
Vehicle Fitment- 2010 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
Cardone Reman® Remanufactured Oil Cooler for 2010 GMC Sierra 3500 HD
PartNumber: 2P-101Product Specifications- Color: Silver
- Cooler Inlet OD Size: 0.725"
- Cooler Outlet OD Size: 0.725"
- Cooling Row Quantity: 11
- E-Waste: No
- Inlet Attachment Type: Gasket
- Installation Hardware Included: Yes
- Material: Aluminum
- Outlet Attachment Type: Gasket
- Package Contents: Engine Oil Cooler, Gaskets, O-Rings, Instruction Sheet
- Product Condition: Remanufactured
- UPC: 884548143500
- Part Description: 2010 GMC Sierra 3500 HD Remanufactured Oil Cooler
Vehicle Fitment- 2010 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.6L
FAQ for Engine Oil Cooler Repair
Q: What should be done before servicing the Engine Oil Cooler Connector?
A:
You should drain the cooling system, remove the engine oil cooler pipe from the oil cooler fittings on the radiator and then not remove the upper and lower engine oil cooler fittings from the radiator at the same time otherwise the engine oil cooler may fail inside the radiator end tank.
By Bob
GM Specialist
01/11/2022Q: How to service the Engine Oil Cooler Fitting?
A:
You should remove the plastic caps from the quick-connect fittings by pulling the caps back along the pipe before installation.
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Oil Cooler (EOC) Hose/Pipe Quick-Connect Fitting?
A:
You should install the EOC pipe into the EOC pipe fitting and then give the cooler pipe a gentle pull.
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Oil Cooler Pipe/Hose Quick Connect Fitting?
A:
You should install a new retaining ring into each quick connector fitting, hook one of the open ends of the retaining ring in one of the slots in the quick connector, rotate the retaining ring around the connector, install the engine oil cooler line into the quick connector fitting and then inspect and fill the engine oil to the proper level.
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Oil Cooler Pipe/Hose Quick Connect Fitting?
A:
You should disengage the plastic caps from the quick connect fittings, pull on one of the open ends of the retaining ring, rotate the retaining ring around the quick connector, remove the engine oil cooler line from the quick connector fitting at the radiator, clean all of the components in a suitable solvent, dry them with compressed air and then inspect the fittings, the connectors, the cooler lines, and the cooler.
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Oil Cooler (EOC) Hose/Pipe Quick-Connect Fitting?
A:
You should remove the plastic caps from the quick-connect fittings, slide the DT-47731 toward the EOC pipe fitting, connect the DT-47731 onto the EOC pipe fitting and then remove the DT-47731 or the J 28585 from the EOC pipe.
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Oil Cooler Hose/Pipe?
A:
You should remove the oil cooler hoses from the clip, the oil cooler hoses from the clip, the engine protection shield, the differential carrier right side nuts, the differential carrier left side bolts, the differential carrier right side nuts, the differential carrier upper mounting bolt and nut, the differential carrier upper mounting bolt and nut, the oil cooler hose adapter bolts, the oil cooler hose assembly and gasket, the oil cooler hose bracket bolt, the oil cooler hose adapter bolts and the oil cooler hose assembly.
By Bob
GM Specialist
01/11/2022See more FAQs (2)