2010 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$56.58MSRP: $102.42
You Save: $45.84 (45%)
FAQ for Drive Belt Repair
Q: How to install the Air Conditioning Compressor Belt?
A:
You should place the belt behind the rear face of the balancer, install the belt installation tool, slide the belt installation tool, slide the belt installation tool downward, place the lower portion of the belt, inspect the drive belt, install the skid plate and then install the accessory drive belt.
By Bob
GM Specialist
29/10/2022
Q: How to install the Drive Belt?
A:
You should install the breaker bar with a hex-head socket to the belt tensioner bolt, the drive belt under the idler pulley, and the air cleaner outlet duct.
By Bob
GM Specialist
29/10/2022
Q: How to remove the Drive Belt?
A:
You should remove the air cleaner outlet duct, rotate the drive belt tensioner clockwise, remove the drive belt and then remove the breaker bar and socket from the drive belt tensioner bolt.
By Bob
GM Specialist
29/10/2022
Q: How to remove the Air Conditioning Compressor Belt?
A:
You should remove the accessory drive belt, remove the skid plate, and then cut the belt from the air conditioning (A/C) and crankshaft pulleys.
By Bob
GM Specialist
29/10/2022
Q: What should be noted when servicing the drive belt?
A:
You should not use belt dressing on the drive belt. Belt dressing causes the breakdown of the composition of the drive belt. Failure to follow this recommendation will damage the drive belt.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to remove the Drive Belt Idler Pulley?
A:
You should remove the accessory drive belt, loosen the drive belt Idler Pulley bolt and remove the idler pulley.
Q: How to remove the Timing Chain?
A:
You should remove the oil pump, the camshaft position (CMP) actuator solenoid valve, the CMP actuator and Timing Chain, the timing chain tension bolts, the crankshaft sprocket, the crankshaft sprocket, and the crankshaft sprocket key.
Q: How to install the drive belt tensioner?
A:
You should place the drive Belt Tensioner on the water pump, install the drive belt tensioner bolts and then install the accessory drive belt.