< Back ×
My Vehicle Change Vehicle
2010 GMC Sierra 3500 HD
< Back to View All
Coil Springs
- Department
- Prices
OEM (Genuine) 2010 GMC Sierra 3500 HD Front Spring
PartNumber: 25876860
Product Specifications- Notes: Silverado, Sierra; Right
- Other Names: Coil Spring, Spring
- Item Dimensions: 6.6 x 6.8 x 13.1 inches
- Item Weight: 13.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15132801
- Replaced by: 86537366
- Part Description: 2010 GMC Sierra 3500 HD Front Spring
Vehicle Fitment- 2010 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$105.35 MSRP:$209.04You Save: $103.69 (50%)OEM (Genuine) 2010 GMC Sierra 3500 HD Coil Spring
PartNumber: 25876854
Product Specifications- Notes: Silverado, Sierra; Left
- Other Names: Coil Spring, Spring
- Item Dimensions: 14.1 x 6.9 x 6.7 inches
- Fitment Type: Direct Replacement
- Replaces: 15801393
- Part Description: 2010 GMC Sierra 3500 HD Coil Spring
Vehicle Fitment- 2010 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
OEM (Genuine) 2010 GMC Sierra 3500 HD Front Spring
PartNumber: 20842480
Product Specifications- Notes: Silverado, Sierra; Left
- Other Names: Coil Spring
- Item Weight: 7.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25940744
- Part Description: 2010 GMC Sierra 3500 HD Front Spring
Vehicle Fitment- 2010 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Coil Springs Repair
Q: What is the recommended torque for the Rear Spring Stop nuts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Shock Absorber Module bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How many nuts attach to the Rear Spring Stop?
A:
There are 4 nuts attached to the Rear Spring Stop.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Rear Spring Front Stop?
A:
You should raise and support the vehicle and then remove the rear tire and wheel assembly.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the shock absorber and spring assembly?
A:
You should raise and support the vehicle, remove the front tire and wheel assembly and then disconnect the outer tie rod from the steering knuckle.
By Bob
GM Specialist
01/11/2022Q: How many bolts attach to the Rear Spring Stop?
A:
There are 3 bolts attached to the Rear Spring Stop.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Shock Absorber Module nuts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Rear Spring Sear Stop?
A:
You should raise and support the vehicle and then remove the rear tire and wheel assembly.
By Bob
GM Specialist
01/11/2022Q: How many bolts attach to the Shock Absorber Module?
A:
There are 2 bolts attached to the Shock Absorber Module.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Rear Spring Stop bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (5)