2010 GMC Sierra 3500 HD Camber and Alignment Kit

You should install the alignment equipment according to the manufacturer's instructions, jounce the front and the rear bumpers 3 times before checking the wheel alignment, measure the alignment angles and record the readings and then adjust alignment angles to vehicle specification.

You should loosen the jam nut on the inner tie rod, rotate the inner tie rod to the required toe specification setting, install the jam nut on the tie rod, check the toe setting after tightening, and then re-adjust the toe setting.

The recommended torque is 75 N.m (55 lb-ft).

You should not push or pull on the tires during the alignment process, determine the caster angle, determine the positive camber or negative camber angle, remove the pinned adjusting cam insert, not reinstall the cam insert, loosen the upper control arm cam adjustment bolts, adjust the caster and the camber angle and then verify that the caster and the camber are still within specifications.