2010 GMC Sierra 3500 HD Brake Master Cylinder

You should install the supply and return hoses to the vehicle and the retainers, install the ABS module splash shield bolts, and the ABS module splash shield retainer, and then install the left front wheelhouse liner.

You should remove the master cylinder reservoir cap and diaphragm, install suitable fittings to the master cylinder ports, install transparent hoses to the fittings installed to the master cylinder ports, fill the master cylinder reservoir, ensure that the ends of the transparent hoses running into the master cylinder reservoir are fully submerged in the brake fluid, remove the transparent hoses from the master cylinder reservoir, install the master cylinder reservoir cap and diaphragm, remove the fittings with the transparent hoses from the master cylinder ports and then remove the master cylinder from the vise.

You should remove any dirt or debris from the brake pipe fitting and then cap the brake pipe fittings to prevent brake fluid loss and contamination.

You should install the master cylinder adapter gasket, the brake master cylinder adapter, the 4 brake pedal bracket nuts, the brake pushrod retainer, the brake pushrod retainer bolt, the master cylinder seal, 2 new master cylinder nuts, and a scan tool to the vehicle.

You should remove the brake fluid from the brake master cylinder reservoir, disconnect the brake fluid level sensor electrical connector, disconnect the brake master cylinder reservoir return hose quick connect, remove the left front wheelhouse liner, remove the antilock brake system (ABS) module splash shield retainer, remove the ABS module splash shield bolts, remove the ABS module splash shield and then remove the brake pressure modulator valve (BPMV), return hose quick connect.