FAQ for Body Control Module Repair
Q: What should be noted when servicing the Body Control Module?
A:
You should remove the body control module (BCM) cover, disconnect the electrical connectors, press on the tabs to release the body control module, and then program the module.
By BobGM Specialist
01/11/2022 Q: How to service the Auxiliary Body Control Module?
A:
You should press on the tabs to release the auxiliary body control module, disconnect the electrical connectors and then reprogram the auxiliary body control module if replaced.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Body Control Module Bracket?
A:
You should remove the knee bolster panel and the instrument panel driver knee bolster deflector.
By BobGM Specialist
01/11/2022 Q: How to service the Serial Data Gateway module Assembly?
A:
You should press on the tabs to release the serial data gateway module, disconnect the electrical connectors and then reprogram the serial data gateway module if replaced.
By BobGM Specialist
01/11/2022 Q: How many screws attach to the Body Control Module Bracket?
A:
There are 3 screws attached to the Body Control Module Bracket.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Communication Interface Module?
A:
You should remove the instrument panel accessory trim plate, remove the Heating Ventilation and Air Conditioning (HVAC) control module and then remove the radio.
By BobGM Specialist
29/10/2022 Q: What should be noted when servicing the Communication Interface Module?
A:
You should push outward on the tab to release the communication interface module from the bracket, disconnect the electrical connectors and then reprogram the communication interface module after replacement.
By BobGM Specialist
29/10/2022 See more FAQs (2)