Part Description: 2010 GMC Sierra 3500 HD Control Asm-Automatic Transmission
More Info
Vehicle Fitment
2010 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$110.43MSRP: $166.58
You Save: $56.15 (34%)
FAQ for Automatic Transmission Shift Levers Repair
Q: How to remove the Shift Lever?
A:
You should remove the steering column shroud, roll back the shift lever seal on the shift lever, disconnect any electrical connectors as needed, remove the shift lever bolt and then remove the shift lever.
By Bob
GM Specialist
01/11/2022
Q: How to install the Shift Lever?
A:
You should install the shift lever, install the shift lever bolt, connect all electrical connectors, place the shift lever seal and then install the steering column shroud.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noted when servicing the Transmission Control Module (TCM)?
A:
You should disconnect the TCM electrical connector, twist or tilt the Transmission Control Module electrical connector and then reset the transmission adaptive pressure (TAP) values using a scan tool that will erase all learned values in all cells.
Q: How to install the Transmission Rear Mount?
A:
You should install the Transmission Mount to the transmission bolts and the transmission mount to the crossmember nut.
Q: How to install the Automatic Transmission Fluid and Filter?
A:
You should install the magnet onto the filter adapter, the transmission external oil filter, the drain plug, and the drain plug seal.