Notes: 3/4 & 1 Ton, W/Dual Rear Wheels, W/Trailer Brake
Other Names: ABS Control Unit
Item Dimensions: 6.3 x 5.1 x 3.1 inches
Item Weight: 1.20 Pounds
Fitment Type: Direct Replacement
Replaces: 15858819
Part Description: 2010 GMC Sierra 3500 HD Electronic Brake Control Module Assembly
More Info
Vehicle Fitment
2010 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Abs Control Module Repair
Q: What should be done before servicing the Electronic Brake Control Module?
A:
You should turn the ignition switch to the off position, raise and support the vehicle and then remove any dirt and debris from the area of the brake pressure modulator valve (BPMV).
By Bob
GM Specialist
01/11/2022
Q: How to service the Electronic Brake Control Module (EBCM)?
A:
You should disconnect the EBCM electrical connector, pull the EBCM away from the BPMV, not force the components apart, remove the EBCM to the brake pressure modulator valve (BPMV) gasket, inspect for damage, align the EBCM and the brake pressure switch to the BPMV and then program the EBCM.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to service the Park Brake Shoe and Lining?
A:
You should place the open end of the park brake shoe over the axle flange and rotate it, apply a thin coat of high-temperature silicone brake lubricant to the contact areas of the brake shoe and the backing plate and then adjust the park brake.
Q: How to install the Rear Wheel Speed Sensor Ring?
A:
You should install the wheel speed sensor ring, the axle shaft bearing, the axle shaft seal, the axle shaft, the rear axle housing cover, the rear wheel speed sensor, and the tire and wheel assembly.