Part Description: 2010 GMC Sierra 3500 HD A C Compressor Clutch
More Info
Vehicle Fitment
2010 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.6L
$144.11
FAQ for A/C Clutch Repair
Q: How to adjust the Air Conditioning Clutch Drive Plate?
A:
You should install the clutch plate assembly, measure the air gap between the pulley and the drive plate, adjust the 65 mm (0.014-0.026 in) air gap, and then install the clutch plate retaining bolt.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the clutch plate retaining bolt?
A:
The recommended torque is 18 N.m (13 LB-FT).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Blower Motor?
A:
You should install the Blower Motor, the blower motor to the heater/ventilation module, the blower motor insulating cover, the blower motor insulating cover screws, and the sound insulator panel.
Q: What should be done before servicing the Heater Core?
A:
You should remove the Heating Ventilation and Air Conditioning (HVAC) module and then disconnect the wiring harness retainer from the Heater Core cover.
Q: How to remove the Heater Inlet Hose?
A:
You should remove the air intake tube, the heater and surge tank hoses from the mounting clip, the inlet Heater Hose from the water pump, and the inlet heater hose.