2010 GMC Canyon Wiper Blade

You need to remove the wiper blade from the wiper arm and disengage the bottom claws of the wiper blade from the notches in the wiper blade element. Finally, you need to pull the wiper blade element out through the wiper blade claws.

You need to position the wiper blade in the inside radius of the wiper arm hook and insert the hook of the wiper arm through the opening in the wiper blade. Then you need to pull upward until the locking tab of the pivot engages the slot in the hook. Finally, you need to carefully lower the wiper arm and blade onto the windshield.

You need to clean the windshield glass and clean the wiper blade elements. Then you need to perform the wiper arm pressure test. Finally, you need to inspect the wiper blade element set.

You need to insert the open end of the wiper blade element into the bottom claws of the wiper blade and guide the wiper blade element through the wiper blade claw sets. After that, you need to engage the bottom claw of the wiper blade into the notches in the wiper blade element. Finally, you need to install the wiper blade onto the wiper arm.

You need to lift the wiper arm, hold it in the upright position, push upward the locking tab of the wiper blade clip and pull downward on the wiper arm blade. Then you need to remove the wiper blade from the inside radius of the wiper arm. Finally, you need to bring the wiper arm out through the opening in the wiper blade.