2010 GMC Canyon Transmission Mount

You need to remove the driver's bucket seat or split bench seat, the left front sill plate, the left hinge pillar, and the left center pillar sequentially. Then you need to release the 2 tabs retaining the TCCM to the bracket, partially remove the TCCM from the bracket, and disconnect the electrical connectors. After that, you need to remove the TCCM from the vehicle, and you also need to remove the 2 fasteners retaining the bracket to the floor panel, if you remove the bracket. Finally, you need to remove the bracket from the vehicle.

You need to insert a flat-bladed tool between the range selector cable end and the range selector lever. Then you need to pry the range selector cable end away from the range selector lever.

You need to disable the supplemental inflatable restraint (SIR) system, disengage the shift lever seal from the steering column trim covers, and slide it up the shift lever. Then you need to remove the shift lever bolt from the shift lever and remove the shift lever with the shift lever seal from the steering column. Finally, you need to transfer any parts as needed.