Part Description: 2010 GMC Canyon Tail Lamp Assembly
More Info
Vehicle Fitment
2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Tail Light Bulbs Repair
Q: How to install the Tail Lamp Bulb?
A:
You need to install the bulbs to the tail lamp, and/or side marker lamp sockets. Then you need to press the tail lamp to the rear body panel until fully seated, and install the tail lamp screws to the tail lamp. Finally, you need to close the tailgate.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the tail lamp screws?
A:
The recommended torque is 3 Nm (26 lb in).
By Bob
GM Specialist
01/11/2022
Q: How to remove the Tail Lamp Bulb?
A:
You need to open the tailgate and remove the screws from the tail lamp assembly. Then you need to remove the lamp assembly and remove the tail lamp sockets. Finally, you need to remove the bulbs from the tail lamp and/or side marker lamp sockets.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Halogen Bulb?
A:
You need to secure the bulbs into the bulb sockets and to the lamp assembly and insert the inside edge of the lamp tabs into the grille support. Then you need to rotate the lamp assembly into the fender bracket and push on the outboard edge of the lamp. Finally, you need to inspect the lamps.
Q: How to remove the Front Fog Lamp Bulb?
A:
You need to turn the fog lamp switch to the OFF position and disconnect the electrical connector. Then you need to rotate the bulb socket counterclockwise. After that, you need to remove the socket from the fog lamp housing, then you can remove the bulb from the socket.
Q: How to install the Headlamp Bulb?
A:
You need to connect the electrical connector to the bulb, and push in and rotate the high beam headlamp and low beam headlamp 1/4 turn clockwise. Then you need to install the bolts retaining the headlamp and inspect the headlamps for proper operation. Finally, you need to install the front grille.