Notes: Gap 0.040; Stock# 5090; Denso is OE Manufacturer / Iridium Long Life Plug - Patented Iridium Alloy Plug (90% Ir) w/Platinum Ground Strap;Denso is OE Manufacturer / Iridium Long Life Plug - Patented Iridium Alloy Plug (90% Ir) w/Platinum Ground Strap
Center Electrode Core Material: Copper
Center Electrode Tip Material: Iridium-Rhodium Alloy
Ground Configuration: Standard
Ground Electrode Core Material: Nickel
Ground Electrode Quantity: 1
Ground Electrode Tip Design: Platinum Chip
Hex Size: 16.0
Manufacturer Heat Range: 16
Pre-Gap Size: 0.040
Reach: 18.00
Resistance: 5000
Seat Type: Tapered
UPC: 042511050907
Part Description: 2010 GMC Canyon Iridium Long-Life™ Spark Plug
More Info
Vehicle Fitment
2010 GMC Canyon | SLE | 8 Cyl 5.3L
2010 GMC Canyon | SLT | 8 Cyl 5.3L
FAQ for Spark Plug Repair
Q: How to remove the Spark Plug?
A:
You need to remove the ignition coils, clean the spark plug recesses with low-pressure air, and remove the spark plugs from the cylinder head. Then you need to inspect the spark plugs.
By Bob
GM Specialist
01/11/2022
Q: How to install the Spark Plug?
A:
You need to measure the spark plug gap on the spark plugs to be installed and install the spark plugs to the cylinder head. Finally, you need to install the ignition coils.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the spark plugs?
A:
The recommended torque is 18 Nm (13 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should I ensure if I am not removing the oil filter gasket from the adapter?
A:
You need to ensure that the Oil Filter gasket is still on the old oil filter.
Q: How to install the Oil Filter Bypass Valve?
A:
You need to press the new oil filter bypass valve into the engine block and install the Oil Filter Adapter.
Q: Which tool is required during the Heated Oxygen Sensor replacement?
A:
You need to prepare a J 39194-B Heated Oxygen Sensor Wrench.