2010 GMC Canyon Rocker Arm

You need to lubricate the valve rocker arm and fill the valve lash adjuster and install the valve rocker arm and valve lash adjuster. Then you need to slowly rotate the engine counterclockwise enough that the cam lobe fully depresses the spring again. After that, you need to remove the EN-47945 from the cylinder head and repeat as required. Finally, you need to install the camshaft.

You need to remove the camshaft cover and rotate the crankshaft until the affected cylinder valve is fully open. Then you need to install the EN-47945 on the engine cylinder head and rotate the engine clockwise. After that, you need to remove the valve rocker arm and valve lash adjuster. Finally, you need to clean and inspect the valve rocker arm and valve lash adjuster.

You need to prepare the EN-47945 Valve Spring Compressor.